What is your enquiry?
For 3-way valves type L3FM-T, M3FM-T, G3FM-T
Electric valve actuator type CAR is specially designed to meet the demands of the powerful low frequency vibration environments in marine installations.
The main applications are cooling of freshwater, sea water and lubricating oil systems for main and auxiliary engines.
The actuator is used for Clorius 3-way valves type L3FM-T, M3FM-T and G3FM-T.
For mounting and starting up, the instructions delivered with the actuator must be followed carefully.
No special service is needed. It is recommended to check and grease the actuator at every docking or every three years.
Casing: Watertight IP67, Nema 4 and 6
Ambient temp.: -30°C to +70°C, 150°C/1 hr.
Power Supply: 120/230 VAC, 1-Phase (50Hz/60Hz)
380/400/440 VAC, 3-Phase (50Hz/60Hz)
24 VDC (CAR 015-028)
Torque switches: Open/Close
Limit switches: Open/Close, additional limit switches on request
Stall protection: Built-in Thermal Protection
Cut-off at 150°C ± 5°C / Reset at 97°C ±15°C
Travel angle: 90° ± 5°
Indicator: Continuous Position Indicator
Manual override: AUTO Declutching Mechanism
Worm gear: Permanently lubricated and Self-locking
Mechanical stops: External Adjustable Limit Stops
Space heater: 20 W (115/230 VAC, 24 VDC)
Cabeling: 2 x R ¾”
Lubrication: Grease NLGI Grade 2 (EP-Type)
Materials: Steel, Aluminium Alloy, Al Bronze
External coating: Anodizing and Dry Powder Epoxy
Duty Cycle: On-Off: S2 50%
Modulating: S4 75%
Clorius CAR Electric Valve Actuator
All documentation and datasheets of Clorius Control components can be found here